DEWETRON is your trusted partner for precise data acquisition for the entire mobility industry. Our solutions provide accurate and comprehensive data for informed decision-making across tests such as driving tests, powertrain testing, ADAS testing, vehicle dynamics and durability and more.

ZD Technology provides simulation products such as ZD Box series and ZD Vehicle Bus Tool to meet data generation and simulation needs, offers big data recording, cloud-based analysis management, and visualization solutions via ZD Datalogger and ADlogger series, and supplies test benches and interface devices.

The power unit is the "heart" of servo hydraulic. Our company FS-HPU19 silent power unit is integrate the E-motors and pumps in oil tank. The noise be isolated by the oil tank to minimize the noise of the power unit, 90L/ min@21Mpa Under the working conditions, the noise can be lower than 75DB, with the characteristics of small volume and low noise; The FS silent power unit basic modules is flow rate of 100L/min, and the maximum flow rate can reach 600L/min

The VR9700 controller is Vibration Research's premium performance, low-channel-count hardware. Set up and safely control vibration shaker tests with this compact and powerful device, which meets many needs, including low- to medium-channel-count setups, single-axis control, and demanding data processing. The VR9700 supports up to 128 input channels and features a 256 kHz maximum sample rate, a small footprint, and low power requirements.

As vehicles evolve into complex, software-defined systems, traditional testing methods are no longer sufficient. Testing isolated ECUs fails to capture the intricacies of real-world integration, where late-stage issues can derail development. Synopsys is driving a modern approach which demands early, continuous validation with scalable, cloud-ready simulation platforms.
Virtual prototyping, powered by tools like Synopsys Virtualizer™ and Silver™, offers a robust foundation. These tools enable seamless build and integration of virtual ECUs across abstraction levels, supporting synchronized, multi-host simulations. With Saber™ power electronics modelling, combined with TPT™, a model-based testing solution, teams can automate regression maintenance, generate edge-case scenarios, and reuse test cases across development stages—dramatically reducing effort and increasing coverage.

Suzhou 3ctest Electronic Co., Ltd. has launched its new-generation Electrostatic Discharge Simulator EDS MAX30, providing a more accurate and reliable verification solution for electrostatic discharge (ESD) immunity testing of complete vehicles and electronic components.

Eckel is a global leader in the field of acoustic testing laboratories / anechoic chambers. Sinetac is the exclusive strategic partner of Eckel in Greater China, offering a wide range of services including anechoic chambers, listening rooms, reverberation chambers, soundproof rooms, R&D equipment, and consultation including NVH(Noise, Vibration, Harshness) testing and CAE simulation, as well as advanced algorithms, sensors, and controllers for mass production.

In the area of research and development in the automotive industry, fast and accurate temperature control is an important part of various tests and test simulations under realistic conditions.

For over three decades, Satake Engineering Co., Ltd. (SEC) has specialized in large-scale, custom-designed climatic simulation test chambers within the automotive testing sector. The company excels in advanced temperature and humidity control technologies, extreme climatic simulation, and sophisticated system integration.

Energy Saving– The inverter-type chiller automatically adjusts the compressor speed based on cooling demand, ensuring optimal efficiency and maintaining a high COP (Coefficient of Performance), significantly reducing energy consumption.

MXsteerLink links steering HiL with the MXsteerWheel RTpro steering force feedback unit. High-precision steering angles and steering torques are exchanged in real time, latency-free and in very fast cycles. This combination is essential for an authentic steering feel in applications both in the lab and on dynamic driving simulators.

In response to the ISO 16750-2:2023 test requirements, Shanghai Lioncel Electromagnetic Technology Co., Ltd. has developed a specialized testing system.

The NVH chassis Dyno system, which adopts fully silent sound insulation treatment, can be used for performance testing of light vehicles. The system uses an AC electric dynamometer, which can simulate road resistance with full electrical inertia based on the inherent mechanical inertia of the chassis dynamometer itself, and can reproduce the road driving resistance or customized road resistance of the tested vehicle.

Sensors, Inc. has developed new technology based on Tunable Diode Laser (TDL) spectroscopy to measure CH4, NH3 and N2O.

VRTE-IV supports target scattering characteristic simulation and enables radar waveform capture, storage and analysis, RF/Antenna performance evaluation, perception capability verification, and anti-jamming capability testing. It also supports intelligent driving, intelligent transportation, low-altitude detection and avoidance, and complex electromagnetic interference scenario modeling.

The Q-SUN Xe-8 tester offers greater capacity, lower price, and significantly longer lamp life than leading competitors, in addition to its unmatched technical capabilities.

The unique designed POWER METER QINGZHI 8966C1 has been economic widely used in at all sectors. QINGZHI INSTRUMENT has been focused on electrical parameter measurement technology for more than 37 years of experience, covered a wide range of serviced customers. Relevant testing for electric vehicles component for example, traction motor, compressor, Domain Controller (DCU), on-board Charger (OBC), DC converter, Power Control Unit (PCU), Inverter and Reduction Gear.

MESSRING introduces an addition to its dummy product range, aimed at enhancing the realism and efficiency of ADAS, CAV system testing.

The KFV series strain gauges by Kyowa are foil-type strain gauges using Fe-Cr alloy foil as the sensing element, specifically developed for strain measurement in hydrogen environments. With excellent resistance to hydrogen embrittlement, KFV gauges maintain long-term stability under high-pressure and high-concentration hydrogen conditions.

Pneumatic and hydraulic brakes are widely used in a wide range of industries. It adopts modular design, compact design structure, small size, adjustable pressure and fast return speed. Easy to install and simple to maintain. The KB, KBH and HP series are widely used in the automotive inspection industry and are used by many customers.

GTAKE provides a variety of solutions for power supply system of test rigs, including DC Source1500V and low-voltage big-power multi-drive frequency inverter cabinets.

AiSim is the world’s first ISO 26262, ASIL-D-certified automotive simulator for verification and validation. Powered by the propriety, real-time aiSim AIR engine and physics-based sensor, it addresses all the requirements for a physically correct environment and weather simulation with complete determinism and repeatability.

Mobilizer is a cutting-edge automotive gateway addresses diverse, demanding requirements in vehicular communication and testing. It combines unparalleled flexibility, ruggedized hardware, and user-friendly software while integrating high-performance protocols including CAN FD, Automotive Ethernet (100/1000Base-T1), EtherCAT, and FlexRay. The solution supports multifaceted applications such as data logging, gateway functionality, rest bus simulation, and firmware flashing. Its Advanced Configuration Tool (ACT) significantly enhances protocol testing efficiency.

Hanhang (Beijing) Technology Co., Ltd., founded in 2014, is dedicated to developing world-class structural dynamics testing and simulation analysis of industrial software and instruments, as well as building a deeply specialized PLM product that integrates three key components (CAT+CAE+ENG).

Hangzhou Radiant Digital leads innovation in vibration testing with comprehensive systems for single axis and multiple axis (MIMO/MESA/MDOF) vibration testing. Patented technology, cloud monitoring, and advanced safety features are used to create complete testing systems for leading automotive industry manufacturers.

BBS Automation is among the global leaders in the field of flexible test solutions, including test benches and highly sensitive test systems.

Realize all kinds of high-speed motor drives for inverter algorithm development. Scalable output from 200kW by replacing power modules, drivers, and PCUs. Replaceable key components brings scalability for the inverter platform of e-Axle. Power-HIL Application linked with Test Data.

ATiS Test and Measurement (Shanghai) Co., Ltd. has been committed to developing powerful and high-performance data acquisition systems. As a data acquisition system independently designed and manufactured by a Chinese team, Fangzhou DAQ subverts traditional design concepts and integrates different available technologies into one, making it a powerful, flexible, and fully functional data recording system. Fangzhou has truly achieved the integration of different types of instrument functions into a simple and easy-to-use data acquisition system.

EOL testing is an important step in vehicle production and manufacturing to ensure that the software version of the ECU is correct before leaving the factory, DTC reading, functional check, and is the parameter configuration consistent with the design requirements? There are new requirements for the EOL system especially for SDV.

Chroma introduces the Chroma 1210 E-Propulsion Test System, designed for both passenger and commercial electric vehicle (EV) applications. This system provides comprehensive simulation and testing for EV powertrains, including e-motors, motor drivers, transmissions, and e-drive systems.

TOSUN's core software of the in-vehicle network toolchain——TSMaster, is a powerful and comprehensive tool that enables full-scale simulation and testing for automotive electronics.

Vehicle energy management or Vehicle Energy-flow testing is indispensable in the verification stage of vehicle prototyping, model upgrading, and benchmark vehicle analysis. Vehicle energy management analysis can clearly indicate the distribution of energy consumption of a vehicle and give suggestions for optimizing and improving the vehicle energy efficiency under the premise of meeting the vehicle power demand and driving comfort requirement.

HTDGS (The high-temperature dynamic gate bias test system) is mainly used for the power semiconductor dynamic gate bias burn-in test, and the equipment can apply a specified gate bias pressure(Voltage can be configured according to customer requirement), test software can setup the measurement parameters and monitor parameters, collect and record all real-time test parameters,

This chamber simulates diverse climatic conditions (wind speed, temperature, humidity, solar radiation, rain, snow, etc.) and vehicle dynamics (speed, resistance) to evaluate the performance of vehicles, A/C systems, and components under controlled conditions, ensuring compliance with industry and enterprise standards for automotives, A/C, ventilation, and cooling systems.

For over three decades, Satake Engineering Co., Ltd. (SEC) has specialized in large-scale, custom-designed climatic simulation test chambers within the automotive testing sector. The company excels in advanced temperature and humidity control technologies, extreme climatic simulation, and sophisticated system integration.

MESSRING introduces an addition to its dummy product range, aimed at enhancing the realism and efficiency of ADAS, CAV system testing.

This is NEW Generation digital omni-probe which integrated a few high-precision but small size sensors inside the probe body, which can be operated from -150° to +150° in both α and β directions.

Amid the wave of automotive intelligence and electrification, Gensors, a brand under Bongang Group, has launched three strategic sensors—PA100, PA100WB, and PA300—designed to address critical industry pain points.

We have developed a standardized processing pipeline that supports large-scale data collection, processing, 3DGS scene reconstruction, and application, providing critical support for training spatial intelligence models. By seamlessly integrating 3DGS with our rich 3D digital assets, we greatly enhance scene richness, boosting AI’s capacity to understand and generate complex 3D spaces.

ENCOPIM delivers custom-made test rigs mainly for Automotive sector, including its ever-changing Passive Safety field.

Siqizhixin provides solutions based on latest technologies like electromagnetic linear motors, to build 6-DOF shake tables and driving simulators, 4-posters, damper testers, steering testers, together with real-time controllers. We provide comprehensive HIL simulation system based on mechanical test rigs for development of active chassis.

Palmary Technology Ltd. is a pioneering force in advanced automotive testing, delivering comprehensive solutions that drive the future of mobility. We empower the world's leading automotive manufacturers and suppliers to meet the highest standards of performance, safety, and environmental responsibility. Our expertise is centered on innovating critical testing applications for the next generation of vehicles.

BASSETTI China is a member of the BASSETTI Group. The BASSETTI Group is the creator of TEEXMA® Software, a modular and configurable platform that provides one technology, multiple solutions. TEEXMA® is continuously optimized and supports solutions such as LIMS, Quality Management System, FMEA, or Technical Knowledge Management and other key areas.

For the end-to-end NOA systems in autonomous driving, performance validation and reliability assurance constitute critical prerequisites for achieving large-scale deployment. Serving as the strategic cornerstone of validation architecture, simulation testing not only continuously empowers technological evolution, but also establishes systematic verification infrastructure for the emerging "Enhanced Perception, Streamlined Mapping" algorithmic paradigm.

Etech Automotive Technology's main business covers calibration, development, and testing services for traditional and new energy vehicle powertrains. At this exhibition, we will present our continuous innovations in alternative fuel technology. We have developed unique storage technologies and advanced monitoring systems to prevent fuel leakage and ensure stability.

ZES ZIMMER’s LMG600 series power analyzers help users to identify optimization potential to boost efficiency, featuring seven customizable power input modules with four distinct types, each tailored for diverse analysis applications.

One Measurement Group, Ltd. was founded in 2003, headquartered in Hong Kong with representative offices in Guangzhou, Beijing and Shanghai. Since its inception, the company has been working with the world's most advanced sensors and test instrument manufacturers to provide accurate measurement solutions for each customer. From the front end of the measurement chain to the later data processing, we can provide complete Program.

ZEER ASEva mini is a lightweight, cost-effective data acquisition and road test system. The equipment adopts a full　stack modular architecture and industrial-grade hardware standard design. The body is compact and small, supports rapid replacement of data hard disks, and takes into account the flexibility of vehicle deployment and data flow efficiency. The intelligent acquisition mode supports dual solutions of automatic recording at power-on and external signal-triggered recording, which is adapted to multi-scenario testing needs.

T-T Electric founded more than 100 years ago, is a world-class supplier of high-quality power dynamometers, industrial motors and drives. As an industry pioneer, the company is an experienced and established manufacturer with a comprehensive and cost-effective range of highly reliable dynamometer and drive products.

STS-Swiss Pressure Transmitter Specialist. STS develop, produce and sell pressure measurement solutions.

We've been a significant force in the world of pressure sensor development since 1987. We have been developing and customized pressure sensors for ranges from vacuum to 1000bar, and its accuracy can reach 0.05% @100bar. We have abundant experience for Offshore、automobile engine/gear box test system、Aerospace/aviation test system、tire machinery、Shipbuilding & Marine etc.

VSAR is a vehicle diagnostic simulation software developed by Nanjing Jinyan High tech (Nanjing) Co., Ltd. It is suitable for the design, development, testing, and maintenance scenarios of whole vehicles and ECUs. It has functions such as sending and receiving large amounts of data messages, analysis, recording and playback, simulation, diagnosis, flashing, calibration, etc. It supports automated and flexible editing processes and AI assisted programming, and can achieve UDS online and offline diagnosis, DoIP diagnosis, online and offline measurement calibration.

Stropower Technologies is dedicated to developing battery research & test technology and capable to offer complete testing solution & service - including standards consultation, testing equipment & software as well as LIMS (Laboratory Information Management Systems).

VISOL is a total video solution company established in 2000 with the founding philosophy of “Human and technology create future.” With our customized, integrated systems, and know-how, we serve our customers in three main fields of businesses: testing solutions, sports solutions, and motion capture solutions.

RIG is a global supplier of test and simulation systems,committed to providing world-class field solutions services for components from automobiles,high-railway to aerospace applications.

At the upcoming Shanghai Automotive Testing Expo, Hangzhi will proudly showcase a high-precision current sensor designed for electric drive system testing, battery system testing, and power electronics testing.

Braking performance is one of the key testing items for vehicle safety testing. The quality of braking is directly related to the traffic safety.

With the rapid development of smart vehicles, autonomous driving, and connected car technologies, automotive electronic systems are undergoing accelerated transformation, covering multiple areas such as intelligent cockpits, autonomous driving, powertrains, and body electronics. Correspondingly, the testing requirements for automotive electronics are also growing continuously.

VenetDCP provides an environment that connects large numbers of simulation models and varied development tools. It realizes collaboration cyberspace of model-based development (MBD) across multiple teams and companies.

The OSM Reference System is an advanced tool designed to evaluate the performance of Driver Monitoring Systems (OMS) against stringent safety standards such as NCAP and GSR requirements. It provides an objective, consistent, and reproducible method for assessing OMS performance, ensuring that automotive manufacturers (OEMs) and testing facilities can meet evolving safety standards and enhance in-cabin safety features.

The integrated test system is a high-end environmental testing solution designed for the automotive industry. It can realize vibration, temperature and humidity control, real-time display and data export in the same software.

The self-developed VTEHlL (Vehicle,Traffic,Environment,Hardware-in-the-loop) by Shanghai Digauto Automotive Technology Co., Ltd. can quickly build comprehensive and complex test scenarios indoors: through the physicalsimulation of the environment and traffic flow, it can build a controllable indoor test environ-ment with conditions close to road testing, providing efficient and highly reliable innovative testsolutions for the research, development, testing and verification of advanced autonomous driv-ing and intelligent driving systems and vehicles.

The QTec technology from Polytec GmbH is an innovative optical measurement technology that has obtained international patent protection. It adopts multi-channel interferometric technique, makes full use of the particle nature of light, and greatly improves optical sensitivity.

Dytran designs and manufactures highly engineered piezoelectric and VC MEMS accelerometers, dynamic force sensors, and pressure transducers for automotive product development testing and embedded solutions.
Applications include:Noise, Vibration, and Harshness (NVH)、Road load, durability, and ride quality、Brake, transmission, and powertrain、Modal analysis、Exhaust system testing、Whole-body and hand-arm vibration measurements、Small structures/mounting plates、Sensors for electric vehicle testing、Portable vibration recorders.

The product under test is connected to the test platform, and the temperature of the internal ethylene glycol solution is heated and cooled. According to the test requirements, the corresponding temperature, flow, and pressure curves can be tested and the changes can be recorded.

MTS EMA (Electro-Magnetic Actuation) Systems are renowned for their high-fidelity damper performance testing. Featuring highly responsive linear electric actuators, they deliver the superior capabilities and data accuracy that damper manufacturers and vehicle OEMs demand. Newly re-engineered EMA Gen 2 systems build on this proven performance with an array of customer-driven mechanical and software innovations, improving test integrity, expanding system utility, and increasing operational efficiency and safety.

For the field of test stand technology, a branch which is permanently subject to advancements, mayr® power transmission develops solutions capable of growing with the increasingly complex concepts being developed.
The high-speed torque limiters, which protect expensive test objects and sensitive measuring units against overload damage, have been especially tailored to the requirements of test stand technology and work reliably and accurately also at very high speeds.

Lneya thermostatic battery test chiller uses an ethylene glycol-water solution for temperature and flow rate testing. The equipment features multi-channel output with independent control for each flow channel, ensuring no mutual interference between channels. Through dynamic temperature control, the BMS achieves precise temperature tracking.

At the upcoming Testing show, KUKA Systems will showcase cutting-edge technologies and innovations in the powertrain testing field. We continue to excel in traditional powertrain testing while expanding into sub-component testing, including E-drive inverter（MCU） testing and On-board charge unit(OBC)/ DC-DC converter unit durability tests.

ITECH introduce its latestmasterpiece of the year, the IT8900G/L series high speed and high power DCelectronic load, today. this new product has become a much-anticipated revolutionarytool in the industry with stronger high power support, faster current dynamicresponse and excellent low voltage loading.

Hebei Weiyue Machinery Co., Ltd. specializes in the production of test iron floors. The iron floors can be installed on air springs, cement mass blocks or cement foundations to provide a stable and reliable foundation for testing. The material of the iron floor can be gray cast iron or ductile iron, and the working surface can be treated with an anti-rust layer.

The new Servoseal® sealing element is a dynamically sealing synthetic ring. The integrated retaining ring made of carbon prevents excessive pressure build-up on the sealing surface due to hydraulic pressure. At small amplitudes, no wear and no scoring are produced on the counterfaces due to lack of lubrication. Thus, this sealing element can be used in the sleek servo actuator series 120 and 300 just as well as in the testing actuator series 320.

New product-Precision Quiescent-Current Measurement with Q.raxx-XL Slimline A108 2SC from Gantner Instruments (Beijing) CO., Limited.

OBSIDIAN is a breakthrough DAQ (data acquisition) instrument that combines the best features of a high-end DAQ system, a long-term datalogger, a real-time EtherCAT data server, and a signal conditioning front end.
OBSIDIAN is built on a low-power ARM processor running an open-source LINUX® operating system and DewesoftRT DAQ software. This architecture allows OBSIDIAN to operate for extended periods without intervention. It can be remotely monitored and controlled via the DewesoftM app on iOS or Android devices, or by computers running DewesoftX software.

AB Dynamics’ new bicycle ADAS target, the Soft Bicycle 360™, will make its debut in China at Automotive Testing Expo. Weighing 30% less than comparable targets, it features a single-piece frame architecture to maintain stiffness and durability whilst also reducing potential damage to test vehicles. The result for test engineers is increased uptime, improved testing efficiency and reduced overall testing costs.