August 27, 28 & 29, 2025
Shanghai World Expo Exhibition and Convention Center, China

Testing Expo China - Automotive 2025

August 27, 28 & 29, 2025
Shanghai World Expo Exhibition and Convention Center, China

Testing Expo China – Automotive is the world’s leading international expo for every aspect of automotive testing, development and validation technologies, taking place every year in Shanghai, with annual sister events in Detroit and Stuttgart. In China, as elsewhere, it is the leading event for the technologies and services in ADAS and autonomous vehicle testing, electric and hybrid powertrain testing, battery and range testing, EMI and NVH test and analysis and the full spectrum of test and validation technologies for full-vehicle, component and systems development.

With over 300 exhibitors displaying their very latest products and services, visitors can expect to see the most up-to-date technologies in ADAS and autonomous vehicle testing, NVH measurement tools, test rigs, simulation packages, durability testing technologies, crash testing, dynamometers, emission measurement systems and dynamic assessment tools, as well as countless service providers such as proving grounds and test facilities.

Testing Expo China – Automotive will see high level person-to-person discussions and physical demonstrations on August 27, 28 & 29, 2025 at the Shanghai World Expo Exhibition and Convention Center, China.

Save the dates – book your booth today!

Add to e-diary Add to Google calendar

SHOW PREVIEW

Read the show preview for a glimpse of the new products on show this year from our exhibitors. Click here to view the show preview in magazine format online.

Read here

Product areas

See the very latest technologies and services that are designed to ensure that the highest standards are met in terms of product quality, reliability, durability and safety.

Acoustic testing
Aerodynamic and wind tunnel testing
Automated test equipment (ATE)
Automatic inspection
Autonomous Vehicle (AV) and/or ADAS development, testing and validation
Battery Technology
Calibration
Climate Test Equipment
Climate Testing
Component testing
Connectors for Test Equipment
Corrosion testing
Crash test analysis
Data acquisition and signal analysis
Data post-processing
Durability Testing
Dynamometers
Electric & Hybrid Powertrain Testing
Electrical system testing
Electronics and microelectronics testing
EMC/electrical interference testing
End-of-line and/or in-line testing technologies
Engine/emissions testing
Environmental testing
Fatigue/fracture testing
Fuels and integrated systems testing
Hydraulics testing
Impact and crash testing
Impact testing
Interior Component Testing
Laboratory instrumentation
Logistics Systems
Materials testing
Measurement Data Management (MDM)
Mechanical testing
Media and Events
NVH analysis
Occupant/pedestrian safety
Quality management solutions
Quality testing and inspection
Reliability/lifecycle testing
Sensors and transducers
Software test and development
Stress/strain testing
Structural and fatigue testing
Telemetry systems
Test facilities
Test facility design
Test management software
Test simulation
Tire testing
Torsion testing
Track simulation and laboratory testing
Vehicle communication/diagnostics
Vehicle dynamics testing
Vehicle simulation
Vibration and shock testing

Products On Show

Vehicle brake testing system
Beijing Integrated System

Braking performance is one of the key testing items for vehicle safety testing. The quality of braking is directly related to the traffic safety.

RIGOL Solutions
RIGOL TECHNOLOGIES

With the rapid development of smart vehicles, autonomous driving, and connected car technologies, automotive electronic systems are undergoing accelerated transformation, covering multiple areas such as intelligent cockpits, autonomous driving, powertrains, and body electronics. Correspondingly, the testing requirements for automotive electronics are also growing continuously.

VenetDCP - Cross-company Distributed Co-simulation | Toshiba Digital Solutions Corporation
Toshiba

VenetDCP provides an environment that connects large numbers of simulation models and varied development tools. It realizes collaboration cyberspace of model-based development (MBD) across multiple teams and companies.

iMotions OSM system sets new standard for DMS testing and in-cabin UX evaluation
TOYO Corporation

The OSM Reference System is an advanced tool designed to evaluate the performance of Driver Monitoring Systems (OMS) against stringent safety standards such as NCAP and GSR requirements. It provides an objective, consistent, and reproducible method for assessing OMS performance, ensuring that automotive manufacturers (OEMs) and testing facilities can meet evolving safety standards and enhance in-cabin safety features.

Integrated test system streamlines EV testing with synchronized simulation and smart data management
SUZHOU SUSHI TESTING

The integrated test system is a high-end environmental testing solution designed for the automotive industry. It can realize vibration, temperature and humidity control, real-time display and data export in the same software.

The self-developed VTEHlL (Vehicle,Traffic,Environment,Hardware-in-the-loop) by Shanghai
Shanghai Digauto Automobile

The self-developed VTEHlL (Vehicle,Traffic,Environment,Hardware-in-the-loop) by Shanghai Digauto Automotive Technology Co., Ltd. can quickly build comprehensive and complex test scenarios indoors: through the physicalsimulation of the environment and traffic flow, it can build a controllable indoor test environ-ment with conditions close to road testing, providing efficient and highly reliable innovative testsolutions for the research, development, testing and verification of advanced autonomous driv-ing and intelligent driving systems and vehicles.

The QTec technology from Polytec GmbH is an innovative optical measurement technology that has obtained
Polytec

The QTec technology from Polytec GmbH is an innovative optical measurement technology that has obtained international patent protection. It adopts multi-channel interferometric technique, makes full use of the particle nature of light, and greatly improves optical sensitivity.

High and low temperature intelligent test unit cooling unit
Nanjing RICOM

The product under test is connected to the test platform, and the temperature of the internal ethylene glycol solution is heated and cooled. According to the test requirements, the corresponding temperature, flow, and pressure curves can be tested and the changes can be recorded.

Lneya thermostatic battery test chiller
Lneya

Lneya thermostatic battery test chiller uses an ethylene glycol-water solution for temperature and flow rate testing. The equipment features multi-channel output with independent control for each flow channel, ensuring no mutual interference between channels. Through dynamic temperature control, the BMS achieves precise temperature tracking.

KUKA Systems: Multi - dimensional Breakthroughs in Powertrain Testing,Awaiting Your Visit!
KuKa Systems

At the upcoming Testing show, KUKA Systems will showcase cutting-edge technologies and innovations in the powertrain testing field. We continue to excel in traditional powertrain testing while expanding into sub-component testing, including E-drive inverter（MCU） testing and On-board charge unit(OBC)/ DC-DC converter unit durability tests.

Itech unveils IT8900G/L series, a high-speed DC load for next-gen power testing
ITECH

ITECH introduce its latestmasterpiece of the year, the IT8900G/L series high speed and high power DCelectronic load, today. this new product has become a much-anticipated revolutionarytool in the industry with stronger high power support, faster current dynamicresponse and excellent low voltage loading.

New Bicycle ADAS Target
AB Dynamics

AB Dynamics’ new bicycle ADAS target, the Soft Bicycle 360™, will make its debut in China at Automotive Testing Expo. Weighing 30% less than comparable targets, it features a single-piece frame architecture to maintain stiffness and durability whilst also reducing potential damage to test vehicles. The result for test engineers is increased uptime, improved testing efficiency and reduced overall testing costs.

Download as PDF
You will need Adobe Acrobat Reader to open the above file

Active members of the press qualify for a free press badge for the show.

Event Marketing

THE LOGOS CAN BE USED TO POST THE EVENT DETAILS ON A COMPANY WEBSITE OR CALENDAR LISTING.

These event logos and banners have been provided for use by sponsors, speakers and conference delegates to share information on the event with friends and colleagues.

Download logo

Download banner

Bentley and MHP Consulting partner on cybersecurity

In a two-year project, MHP Consulting and Bentley Motors have worked together to develop robust cybersecurity and software update management systems (CSMS and SUMS) tailored to the Bentley landscape, ensuring compliance with the UNECE World Forum for Harmonization of Vehicle Regulations (WP.29). Bentley has successfully ...

Messring completes new crash test facility for Mahindra in India

A state-of-the-art crash test facility for Indian vehicle manufacturer Mahindra has been completed and commissioned by Messring in the southern state of Tamil Nadu.

Mercedes-Benz VLE electric vehicle tests long-distance capabilities on journey from Stuttgart to Rome

Two Mercedes-Benz VLE test vehicles have made the trip from Stuttgart to Rome, travelling 1,090km (about 677 miles) in flowing traffic in roughly 13 hours, with two 15-minute charging stops. The route included winding, steep mountain passes through the Alps, long highway stretches, busy rural roads and ...

Opening Times

Wednesday, August 27
09:30hrs – 17:00hrs

Thursday, August 28
09:30hrs – 17:00hrs

Friday, August 29
09:30hrs – 15:00hrs

Shanghai World Expo Exhibition and Convention Center, China

No.1099 Guozhan road
Pudong District
Shanghai, China

Venue website

Testing Expo China - Automotive 2025

August 27, 28 & 29, 2025
Shanghai World Expo Exhibition and Convention Center, China

China’s leading international expo for automotive testing,
development and validation technologies

SHOW PREVIEW

Product areas

See the very latest technologies and services that are designed to ensure that the highest standards are met in terms of product quality, reliability, durability and safety.

Products On Show